Wishlist

Warsaw University of Technology (WUT)

Transnational Access Activity
Countries/Institutes
More +
The manual device is used to assemble electronics components. The system is equipped with a heating table and heated nozzle. 
Climate chamber able to test the effects of environmental conditions on products, materials, or electronic devices. Our device has the possibility to simulate the sun effect on the product.
Bruker DektakXT is a stylus profilometer capable of measuring 55 mm in a single scan and 3D mapping of area up to 200 mm x 200 mm with stitching.
SCS Labcoter® 2 (PDS 2010) is a CVD Parylene deposition system capable of non-porous polymer coatings with layer thickness from 0,5 to 750 μm.
Cometech QC-Tech M2 tensile machine is a universal tensile machine with large test space, long stroke and maximum test capacity is 20 kN. Currently, two sensors (10 kN and 200 N) are available with multiple grips.
The device used to make prints with the aerosol jet printing technique. First, the ink is change to a form of mist, then through specific orifice and cones is deposited on the substrate to form paths and patterns.
AUREL C920 (with a vision system and two TV cameras to simplify the alignment operation between screen/stencil and substrate) is a high precision free stand screen/stencil printing machine and meets the requirements for high quality automatic printing on large areas.
Cellink BIO X bioprinter is a direct-printing dispenser capable of depositioning of liquid materials (including biomaterials) from cartridges onto temperature controlled built plate.
IGT Testing Systems F1 is a printability tester for flexo inks. Can also be used for gravure inks. 
The Brookfield DV2T Viscometer measures fluid viscosity at given shear rates. The principal of operation of the DV2T is to drive a spindle (which is immersed in the test fluid) through a calibrated
The device enables the measurement of the viscosity of non-Newtonian liquids, registration of liquidity curves as well as the determination of the functions of non-Newtonian liquids in conditions in which the sustaining flows are maintained.
Reactor for synthesis of arrays of multi-walled carbon nanotubes (MWCNTs), which uses floating catalyst chemical vapour deposition process.